 |
 |
|
52 Channel 24 Bit/96 kHz I/O Card
| 
|
MIDI I/O x 2 |
|
SPDIF I/O |
|
ADAT Optical |
|
ADAT Sync |
|
Word Clock I/O |
|
|
|
|
|
|
 |
HDSP 9652 offers 3 x ADAT optical I/O, ADAT-Sync In, SPDIF I/O and word clock I/O. On top, there are 2 MIDI I/Os and TotalMix, a DSP-based real-time mixer/router, with hardware-calculated level metering and complete MIDI remote capability.
Thanks to its unique Zero CPU Load technology Hammerfall DSP guarantees highest performance and lowest latency together with full flexibility!
The HDSP 9652 also supports Expansion Boards (EXB). Two internal ADAT inputs and two internal ADAT outputs allow you to realize up to 16 analog inputs, 16 analog outputs, or up to two TDIF ports directly inside the computer.
The HDSP 9652's Secure BIOS Technology allows to perform hardware updates via software/driver without any risk.
|
- 3 x ADAT digital I/O, based
on RME's reliable Bitclock PLL
- 1 x SPDIF digital I/O, based
on RME's reliable DIGI96 technology
- 1 x Breakout cable for coaxial
SPDIF operation
- 1 x Word clock I/O (BNC)
on included expansion board
- 1 x ADAT Sync In (9-pin D-type)
for sample accurate transfers
- 2 x MIDI I/O, 32 channels
high-speed MIDI via breakout cable
- HDSP Meter Bridge: freely
scalable level meters, peak- and RMS calculation directly in hardware
- TotalMix: 1352 channel mixer
with 40 bit internal resolution
- S/MUX poured in hardware:
12 channels 96 kHz/24 bit for record and playback on ADAT optical
...and numerous other features found already in the Hammerfall series. And all this for an unbeatable price!
The Hammerfall®
DSP System comes with drivers for Windows 98/ME (MME with multi-client
operation, ASIO 2.0, GSIF), Windows 2000/XP (full multi-client operation
of MME, GSIF and ASIO 2.0), Mac OS 9.x (ASIO 2.0) and Mac OS X (Core Audio, Core MIDI).
|
|
|
Just click on the hammer symbol in the systray of the taskbar and the settings dialog of the HDSP 9652 comes up. The clear structured, easy to understand window plus the unique informative status windows for input signal, clock mode, sample rate and time code make your work with Hammerfall DSP to a real pleasure. With a simple mouse click you gain access to the full power of your card.
When working with several digital sources it is not only necessary to know if
these are properly locked, but also if they are totally synchronized. RME's exclusive SyncCheck checks
all input signals and displays their actual state, and thanks to our new Intelligent
Clock Control concept you have all clocks and states under control - with
ease.
A display of the time code at the ADAT Sync-In port offers a quick check of the
communication between external device and Hammerfall. |
 |
|
|
|
| Supported sample rates: 32 kHz, 44.1
kHz, 48 kHz, 88.2 kHz, 96 kHz, variable |
| 8 buffer sizes/latencies available: 1.5
ms, 3 ms, 6 ms, 12 ms, 23 ms, 46 ms, 93 ms, 186 ms |
| ASIO zero CPU load technology: 0 (zero!)%
CPU load when using ALL 52 channels! |
| All settings changeable in realtime |
| Clock modes slave and master |
| Automatic and intelligent master/slave
clock control |
| Enhanced Mixed mode: All inputs and outputs
simultaneously operational |
| Unsurpassed Bitclock PLL (audio synchronization)
in ADAT® mode |
| Enhanced Zero Latency Monitoring for
latency-free submixes and perfect ASIO Direct Monitoring |
| Comes with DIGICheck:
the ultimate measurement, analysis and test tool |
| Input 3 x optical (TOSLINK), 1 x coaxial
(Cinch), 2 x MIDI, word clock (BNC) |
| Input format SPDIF, AES/EBU (Consumer,
Professional), ADAT® optical |
| Output 3 x optical (TOSLINK), coaxial
(Cinch), 2 x MIDI, word clock (BNC) |
| Format output SPDIF, AES/EBU (Consumer/Professional), ADAT® optical |
|
| UNIQUE TECHNOLOGIES IN HDSP 9652 |
|
|
|
|
A complete overview of all the unique technologies
in the Hammerfall series can be found here.
|
|
|
See your local
distributor's website for current price information.
|
Copyright © 2005 RME. All rights reserved.
RME is a registered trademark.
This website contains names and marks of other companies.
|
